Installation Guide BESIDE DOOR

Installation Guide

Installation Guide

Beside Door

1. Remove the Water Filter:

  • Lift up and remove the lower door bin.
  • Swing the right end of the water filter out of the compartment.
  • Grasp and rotate the filter counter-clockwise to remove it from the filter head.

2. Install the New Water Filter:

  • Take a new water filter out of its packaging.
  • Remove the protective cover from the o-rings.
  • Insert the new filter into the filter head.
  • Rotate it clockwise until the arrow on the new filter lines up with the arrow on the filter head.
  • Swing the filter back into the compartment.

3. Remove Trapped Air:

  • Put the lower door bin back to its original position.
  • Dispense 2.5 gallons of water to remove trapped air and contaminants from the system.
  • Depress and release the dispenser pad in cycles of 30 seconds ON and 60 seconds OFF.

4. Reset Water Filter Indicator:

  • Replace the water filter when the replace filter icon turns on.
  • After replacing the water filter, press and hold the Water Filter button for three seconds to turn the icon light off.

NOTE: Replace the water filter approximately every six months. The sample image of the panel may differ depending on the model.


Additional Information

Images are for illustration purposes only.

Model location may vary depending on refrigerator model.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection.

Protect from freezing.

IMPORTANT NOTICE

  • Filter replacement should generally be performed every 6 months.
  • Filter replacement may need to be conducted more often in areas where the water quality is microbiologically inferior.
  • The risk associated with small parts can cause choking if swallowed.
  • Keep children away from small parts during the replacement of the water filter.